How To Choose The Optimum Riding Gear
What you wear on a bike may not help you to ride better, but improper gear can certainly spoil a street ride or slow you down on the track. Case in point: At last year's fall Daytona Moto-ST race, our man struggled with his bike's tank constantly battering his chest on the banking, distracting him and making it difficult to tuck in. A chest protector only made things worse. It turns out the rear bulge on the tank put pressure exactly on the zipper pull of his inner suit, which in turn pressed directly on his sternum. The solution? A tiny piece of cloth padding taped over the zipper pull. Sometimes the simplest details can make a big difference, and sometimes you may not even realize that a piece of loose or tight gear is causing you grief until you wear something that fits correctly. Here, then, are some guidelines to follow when selecting riding gear for the street or track; apparel that fits comfortably and provides ample protection, yet doesn't irritate or distract you.
The most important piece of riding gear is the helmet, from both safety and comfort standpoints. Choose a helmet that meets DOT standards and is approved by another entity such as Snell, ECE or BSI, and try different brands and models to find a lid that fits your head's shape as well as its size. Look for good peripheral vision if you do a lot of street riding. Helmet prices vary wildly, but it's worth paying extra for something that is lightweight, has good venting characteristics and has an optically clear shield that doesn't fog in cold weather. Wear a dark shield rather than sunglasses, as glasses can interfere with your peripheral vision. You can wear a thin balaclava underneath to help keep sweat out of your eyes and to add a layer of insulation, and a pair of earplugs will keep out wind noise, which protects your hearing.
The most common mistake we see when people try on a jacket, pants or leathers is they stand upright to determine fit. When was the last time you rode your bike standing upright? Proper sport-riding gear has forward-rotated sleeves and stretch panels on the inside of the elbows and knees so that the material doesn't bunch up. Sit on your bike or crouch down to properly feel how the gear fits. A good street riding outfit will have padding in the elbows, shoulders, knees and often-overlooked hips, and you should have room underneath for a spine protector and additional clothing for insulation. Layer up for warmth rather than use one thick sweater; this will help avoid bunching and let you peel off layers as needed over the course of a day.
At the track, a good set of leathers has all the padding that a street suit has, and you should invest in a quality, full-length spine protector and a chest protector. If you doubt the benefit of a chest protector, ask the Geek about getting poked in the ribs by a ZX-10R key at the dragstrip. The suit should be snug enough that it doesn't flap in the wind yet loose enough that you can move around freely on your bike. A mesh inner suit will help with the latter, and you can replace that with a "wind-stopping" inner suit for colder days if you choose a suit with ventilating holes. Look for stretch panels in the backs of the knees and elbows as well as in the lower back area, and comfortable armor that doesn't dig in when you're in a riding position.
Gloves are perhaps the second most important piece of gear, as they are a barrier between your hands and your bike's controls. Gloves that are too tight will cut off circulation and hinder your reach for the levers, while loose gloves will catch on the controls and bunch up on the grips, giving your blisters. Good-quality gloves have pre-curved fingers to avoid bunching, and thin, strong material on surfaces that touch the grips and levers. Check for a comfortable wrist closure that is not too high or low on your hand-too high and the glove will move around, too low and it may cut off circulation to your hands. The gauntlet should fit comfortably over your jacket or leathers. Just like a suit should fit correctly in the riding position, check a glove's fit with your hand on a grip; you should be able to reach the levers without resistance, and there should be no bunching in the palm or finger areas. Your feet need to have a good feel for the footpegs as well, so boots should be snug without being constrictive. Thin socks underneath will help, and again, don't check a boot's fit by walking around in it-sit on a bike and work the controls. High-end boots will have a skeleton-type arrangement inside or outside that allows easy fore-and-aft movement yet provides good ankle protection and doesn't let the foot move side-to-side. Whether you wear your boots over or under pants or leathers, be sure the fit on the calf is snug right to the top of the boot. Sometimes the real trick is finding gear that works together properly. It's no good having a nice, snug-fitting glove if the gauntlet is too tight to fit over your leathers and doesn't let your wrist move. Tall boots can sometimes interfere with low-fitting armor in leathers. And that nice soft collar material on a jacket can make the most irritating screech when rubbed against some helmet moldings every time you turn your head. Whatever you wear, the key is to maximize protection while minimizing any distractions and irritants that your gear can cause. You want to be able to move freely on your bike and concentrate fully on the task at hand-whether that task is turning a fast lap at the racetrack or just getting to the office in one piece-and not fussing with your gear. For more riding tips, visit sportrider.com
No comments:
Post a Comment